Depending on where your joints are affected, the equipment that are low impact are:. However it is always recommended to first consult with your doctor or physio for recommendations as they are more knowledgeable in your medical history.

Depending on where your joints are affected, the equipment that are low impact are:<ul><li style="font-size: 14px; font-family: Arial, Helvetica, sans-serif;">Cross Trainers</li><li style="font-size: 14px; font-family: Arial, Helvetica, sans-serif;">Exercise Bikes/ Spin Bikes/Recumbent Bikes</li><li style="font-size: 14px; font-family: Arial, Helvetica, sans-serif;">Rowing Machines&#xA0;</li><li style="font-size: 14px; font-family: Arial, Helvetica, sans-serif;">Pilates Reformer&#xA0;</li></ul>However it is always recommended to first consult with your doctor or physio for recommendations as they are more knowledgeable in your medical history.&#xA0;

Which cardio equipment are low impact on joints?

Our equipment are recommended to be used for indoors in a well ventilated room (unless stated otherwise). Storing outdoors will expose it to the elements (weather, heat, dust and condensation). Most of the equipment are made of steel components and w

Our equipment are recommended to be used for indoors in a well ventilated room (unless stated otherwise). Storing outdoors will expose it to the elements (weather, heat, dust and condensation).&#xA0;Most of the equipment are made of steel components and will be more prone to rust when stored outdoors.&#xA0;High temperatures and weather can also affect the use of or damage electrical parts (e.g. treadmills).&#xA0;You will also be forfeiting your warranty for keeping it outdoors.&#xA0;Please seek advice before storing it outdoors.

Can I keep my fitness equipment undercover outdoors?/ Does your fitness equipment require to be used indoors only?

We often get asked how to best lay flooring for a gym or home gym, so we've put together a short list of tips and tricks to help you achieve great results with minimal effort. Step 1 - Check your area. Ensure the surface is level and even. Concrete s

We often get asked how to best lay flooring for a gym or home gym, so we&apos;ve put together a short list of tips and tricks to help you achieve great results with minimal effort. Step 1 - Check your areaEnsure the surface is level and even. Concrete slab floors are ideal if they&#x2019;re in good condition. Timber, tiled, and carpeted floors are also suitable since the mats will sit on top without damaging the surface. Be mindful that any bumps or dips can result in an uneven finish, lifted mat corners, and potential trip hazards.If there are stairs leading to the room, measure the step height and check your local council regulations regarding the maximum allowable step height. Raising the floor level by 15mm with rubber gym flooring might exceed the maximum height allowed.Most rooms have at least one entry doorway, which can be tricky since the floor will be raised by 15mm, causing a swinging door to potentially bottom out on the rubber mats. If the flooring is permanent, you might shave the bottom of the doors for clearance. Alternatively, create a &#x2018;cut out&#x2019; in the floor tiles for the door to swing open. Sliding doors won&#x2019;t have this issue as they don&#x2019;t cross the floor surface in the room. Step 2 - Cutting and LayingNext, consider the room&apos;s shape. In rooms that aren&apos;t perfectly square (most aren&#x2019;t!), avoid alignment issues and excessive trimming by laying your first row along the long wall, placing the second row parallel. This way, if the walls aren&apos;t square, you won&apos;t have to trim as many mats to fit the room&#x2019;s shape.To minimize movement and keep the mats aligned, lay them in a brick pattern. This interlocks the mats, preventing them from slipping past one another. If laid corner to corner, mats may move over time, misaligning your carefully arranged corners.Every few rows, push the mats into each other, closing any gaps and keeping them tight. When you reach the opposite wall, trim the last mat slightly larger than the gap. For a 5m run, trim the last mat 5mm wider; for a 10m run, trim it 10mm wider. Pack the last tile down by standing on it and pushing back against the other rows until it sits flat. Over time, rubber floor tiles shrink slightly, so laying them tightly packed is advisable.To trim the tiles, use a Stanley knife with a fresh blade and a straight edge (a 1m steel ruler is ideal) for a straight first cut. Lay the mat over an edge to open up the cut, making it easier to see, and then continue cutting along the line 6-7 times until through. Light pressure with a sharp blade minimizes the risk of messy cuts or injury.Keep any full-width offcuts, as they can be used to fill any gaps that may open up in the future. Ways to Prevent MovementFor doorways at the flooring edges or if you are only doing a section of the room, securing the mats can be challenging. Options include gluing the open edge down, using a steel strip screwed into the floor, or using double-sided carpet tape on concrete surfaces.&#xA0;If you don&apos;t want a permanent instalment, you can use double-sided carpet tape to stick on the edges of the outer sections of the mats to prevent movement.&#xA0;

How do you lay the rubber gym floor mats?/ What do you use to glue the mats to ground?

Our gym mats are designed for indoors and is not tested for weathering outdoors. Sun and rain can deteriorate the rubber overtime.

Our gym mats are designed for indoors and is not tested for weathering outdoors. Sun and rain can deteriorate the rubber overtime.

Can your gym mats be used outdoors?

Speak to one of our specialists right now via our Live Chat.
Live Chat Hours:

Submit a request using our contact form. Our team will get in touch with you as soon as possible.

Monday - Friday: 9:00am - 5:00pm AEST
Saturday, Sunday & Public Holidays: 9:00am - 5:00pm AEST

Activego

General FAQ

Product Information